| 1. | Tension force transducer with thin film sensor
带有薄膜传感元件的拉力传感器 |
| 2. | Load beams are suitable for measurement of compression and tension forces
测压梁适用于测量压缩力和拉力。 |
| 3. | No movement between the components when a tension force of 150 is applied
承受150n静拉力10秒钟后各部件不可移位。 |
| 4. | The actual tension forces in cables and rods can thus , for example , be measured
比如可以测量钢丝和金属杆中的实际拉力。 |
| 5. | The reverse calculation method of tension force control in construction of prestressed spatial structures
预应力空间结构施工控制张力的逆向计算法 |
| 6. | Cutting pattern finding has three procedures : cutting lines obtainment , curve surface into plane and tension force release
对于裁剪线的确定，本章采用了曲面的最短线?测地线。 |
| 7. | Transfer - beams withstand the tension force , shearing force and moment from the upper pier . when there are more short - piers in
最后,总结了框支剪力墙结构设计过程中应该注意的一些问题。 |
| 8. | The compression or tension forces are transmitted via the two threaded pins into the cylindrical casing , which is also the measuring element
压缩力或张力通过两个螺纹销钉传递到圆筒形测量仪器中。 |
| 9. | Loading tension force for supply and takingup unit , openning purge valve ( spray valve and gun valve ) and starting the cleaning buttom
加载供线及收线系统张紧力，打开清洗阀（喷洗阀及枪阀） ，启动清洗按键。 |
| 10. | The aim of this part is to find an initial equilibrium state , the value and distribution of tension force and the geometry of the surface , when the location of the control points are confirmed
即在建筑师给定预想的曲面形状的前提下，找出与此曲面相接近的初始平衡状态?初始张力的大小、分布和几何形状。 |
